Trying to print a new .gcode file on the CR-10S Pro V2 from SD card, but when trying to start the print, I just get an error on the screen that says "In the Pause" at top-left. The printer does not even try to reach temperature, and stop/pause does nothing. The print never starts.
![[SOLVED] Prusa MINI underextrusion and clogging after the first layer](http://cdn.shopify.com/s/files/1/0073/0290/5945/articles/solved-prusa-mini-underextrusion-and-clogging-after-the-first-layer-369740_345x345@2x.jpg?v=1608432207)